Original pictures will follow!!

New PCB drilling machine with the following equipment:

-LINEAR MOTORS for the X, Y and Z axes,

-2 air bearing WESTWIND spindles 1822-01 (20.000-200.000 rpm),

for drilling only,

-incl. frequency converter (SFU),

-cooling unit with digital display for spindles and linear motors,

-measuring system for X-, Y- and Z-axis (resolution 0,0005mm)

-Granite base frame and portal,

-longitudinal guides, mechanical for X- and Y-axis,

-Z-axis, digital, mechanical bearings, with drop safety device,

-laser measurement of the tools, for length, diameter and concentricity, -tool change with 48 EUROMAGAZINES (480 tools)

-for unringed tools,

-micro drill hold-down with 3 positions

-Quick drill (automatic adjustment of the H-value)

-pneumatic clamping system,

-pneumatic vertical clamping,

-drill breakage signal, (electrically capacitive) for the drill spindle,

-refrigerant dryer with filter for the compressed air,

-machine protection bonnet (round) with automatic door,

Sieb & Meyer CNC 84.00 integrated in the underframe, with:

PC with Windows 10pr

harddrive

RJ 45 ethernet connection

Graphic display of the working program and simulation

Working area: X = 550mm Y = 650mm
Pin D 3.175 mm

Contact depth drilling

Electrical power
3 x 400V (+/-10%) (L1+L2+L3+N+earth) 16A (4kW)
Voltage interruption max. 8ms

Vacuum extraction
Extraction rate
Air volume ca. 1.5 m3/min per spindle
Extraction rate measured at the tool outlet opening of the retaining device 60 to 120 millibar